HOME > CNC Automatic Lathe > CNC Automatic Lathes - Sliding head type > Swiss Type CNC Automatic Lathe GS-1015

 
Features
Specification
Standard Accessories
Optional Accessories
The GS-1015 Swiss Type Automatic Lathe designed and manufactured by GE FONG delivers
superior speed and accuracy for parts turning. Its 24 cam shaft speeds combined with 16 spindle
speeds suit a wide range of applications.
Concentricity accuracy of machining up to 0.003mm. The machine is quality constructed
throughout for maximum dependability and minimum trouble.
Features:
HEADSTOCK
The headstock is moved by two plate cams and a lever mechanism. The main spindle is supported by roller bearings at the front, and precision angular contact bearings at the rear, and the headstock is guided by linear guide. This allows for long-time and high-speed running, and assures smooth sliding of the headstock. The feed rate can be easily adjusted in range from 1:1 to 3:1
CAMSHAFT
The camshaft is driven by a precise worm and worm wheel, reducing its rotation to 1/45. The transmission equipment is designed so that, for each spindle speed, the camshaft can be driven in 24 speed stages in order to obtain optimum working conditions for all jobs.
TOOL REST
Consists of five tools. The first two tools are attached to a rocking arm. Horizontal movement is guided by two cams. The other three tool holders are mounted on the three vertical slides. Highly accurate micrometers, calibrated within 1/100mm, are used to make adjustments for these three tools.
TRANSMISSION MECHANISM
16 different speeds of the main spindle can be easily obtained just by changing the belt position on the pulley. The cam shaft speed is reduced to 1/8 of main spindle speed through the reducing gear.
NEWLY DESIGNED SINGLE SPINDLE
The mechanism is convenient to operate, adjust and maintain. Suitable for drilling, tapping, threading, etc...A safety deviceautomatically stops the machine is the event of threading or tapping failure.
 
Specifications:
 
Item
GS-1015
UNIT
Spindle speed
2395-8065
rpm
Cam shaft speed
1.5-20
rpm
OD tool rest Nos.
5
pcs
ID tool rest Nos.
1
pcs
Drill chuck
ER11
pcs
Collet chuck
P10
pcs
Guide bush
P10
pcs
Tool blank Nos.
5
pcs
Tool blank size
8 * 8
mm
Max. processing dia.
Ø10
mm
Max. processing length-Slide stravel
50
mm
Max. drilling dia.
8
mm
Max. drilling depth
35
mm
Max. tapping dia.
M8 * P1.0mm
Cu
Max. turned taper-Slide taper
Cam Controlled
mm
Spindle speed steps
16
steps
Cam shaft speed steps
stepsless
steps
Spindle motor
3 HP/2.2 KW
HP
Cam shaft motor
AC°¨¹F1/4HP
HP
Coolant pump motor
1 / 8
HP
Coolant tank
35-40
L
Spindle center height
1105
mm
Weight
700
KG
Lathe size
1300*870*1050
mm
Standard Accessories:
 
Item
UNIT
Dies holder ¡í20
SET
Cam blank
SET
Tool box & Adjust tool
SET
Lighting equipement
SET
Oil splash-prevention cover
SET
Coolant sys.
SET
Bar end sensor
SET
Manually loaded single bar feeder
SET
Optional Accessories:
 
Item
UNIT
Oil tank
SET
Slotting attachment
SET
Threading attachment
SET
Automatic bar feeder
SET
Sound-Proof feeding pipe-manually
SET
Cams compeleted
SET
* All specification are subject to change without notice in advance *