 | | The GS-1035 Swiss Type Automatic Lathe designed and manufactured by GE FONG delivers
superior speed and accuracy for parts turning. Its 24 cam shaft speeds combined with 16 spindle
speeds suit a wide range of applications.
Concentricity accuracy of machining up to 0.003mm. The machine is quality constructed
throughout for maximum dependability and minimum trouble. |
|
|
 | Features: |
|
| | HEADSTOCK | | The headstock is moved by two plate cams and a lever mechanism. The main spindle is supported by roller bearings at the front, and precision angular contact bearings at the rear, and the headstock is guided by linear guide. This allows for long-time and high-speed running, and assures smooth sliding of the headstock. The feed rate can be easily adjusted in range from 1:1 to 3:1 |
|
| | TRANSMISSION MECHANISM | | 16 different speeds of the main spindle can be easily obtained just by changing the belt position on the pulley. The cam shaft speed is reduced to 1/8 of main spindle speed through the reducing gear. |
|  |
| | | 3-AXIS ATTACHMENT (for drilling or tapping) | | The mechanism is convenient to operate, adjust and maintain. Suitable for drilling, tapping ( ID or OD), threading, etc...A safety device automatically stops the machine is the event of tapping failure. |
|
| |
|
| Specifications: | | | | Item | GS-1035 | UNIT | | Spindle speed | 2395-8065 | rpm | | Cam shaft speed | 0.5-20 | rpm | | OD tool rest Nos. | 5 | pcs | | ID tool rest Nos. | 3 | pcs | | Drill chuck | ER11 | pcs | | Collet chuck | P10 | pcs | | Guide bush | P10 | pcs | | Tool blank Nos. | 5 | pcs | | Tool blank size | 8 * 8 | mm | | Max. processing dia. | Ø10 | mm | | Max. processing length-Slide stravel | 50 | mm | | Max. drilling dia. | 8 | mm | | Max. drilling depth | 35 | mm | | Max. tapping dia. | M8 * P1.0mm | Cu | | Max. turned taper-Slide taper | Cam Controlled | mm | | Spindle speed steps | 16 | steps | | Cam shaft speed steps | stepsless | steps | | Spindle motor | 3 HP/2.2 KW | HP | | Cam shaft motor | AC°¨¹F1/4HP | HP | | Coolant pump motor | 1 / 8 | HP | | Coolant tank | 35-40 | L | | Spindle center height | 1105 | mm | | Weight | 700 | KG | | Lathe size | 1300*870*1050 | mm |
|
|
| Standard Accessories: | | | | Item | UNIT | | Dies holder ¡í20 | SET | | Cam blank | SET | | Tool box & Adjust tool | SET | | Lighting equipement | SET | | Oil splash-prevention cover | SET | | Coolant sys. | SET | | Bar end sensor | SET | | Manually loaded single bar feeder | SET |
|
|
| Optional Accessories: | | | | Item | UNIT | | Oil tank | SET | | Slotting attachment | SET | | Threading attachment | SET | | Automatic bar feeder | SET | | Sound-Proof feeding pipe-manually | SET | | Cams compeleted | SET |
| * All specification are subject to change without notice in advance * |
|
|
